thermal insulation nail
Secification
Model |
Aiguille diameter |
The depth of drill |
The minimum depth of anchor |
Length of anchor bolt |
The maximum depth of anchor |
8/60 |
8 |
40 |
30 |
60 |
30 |
8/70 |
8 |
40 |
30 |
70 |
40 |
8/80 |
8 |
40 |
30 |
80 |
50 |
8/90 |
8 |
40 |
30 |
90 |
60 |
8/100 |
8 |
40 |
30 |
100 |
70 |
8/120 |
8 |
50 |
40 |
120 |
80 |
8/140 |
8 |
60 |
50 |
140 |
90 |
Feature:
*A-grade pp injection moulding plus superb steel nail
*the tensile capacity of sigle insulation nail )0.8KN
*value added of systematic heat transfer to single nail(0.004(m2. K)
*carried standard: JG 158-2004
Recommended assembly method
1. Operation at ambient temperatures between 15 and 25° C
2. Work surfaces should be clean and dry, free of dust, grease, oil and any other loose matter
3. Remove the protective release paper taking care not to touch the adhesive
4. Place the hanger in the required position and press the base against the surface to be insulated
5. Insulation can be impaled immediately and firmly locked with fastening clips but maximum strength of adherence is achieved after 24 hours