Fiberglass mesh is woven by fiberglass yarn as its basis mesh, and then coated by alkaline resistant latex. It has fine alkaline-resistant, high strength, etc. It is widely used in reinforcing walls, natural marble, plaster board, artificial stone materials and exterior insulation finishing system. It is also widely used for renovating building surface.
Fiberglass mesh Specification
Coated alkali resistant fiberglass mesh
4 × 5mm
1 × 50m or
1 × 100m
Applied to thin slurry, to eliminate small cracks and dispersed throughout the surface pressure.
White, blue, orange and yellow
1 × 50m,
0.20 × 50m, 0.33 × 50m,
0.50 × 50m
Widely used in indoor and outdoor wall, to prevent from a variety of materials (such as brick , light wood, prefabricated structure) of treatment or wall cracking which is caused by a variety of expansion coefficient and rupture.
5 × 5mm
White, blue, orange, yellow, green, etc.
1 × 50m
Used in wall and mixing in a variety of materials (such as brick, light pieces of wood, prefabricated structure), to prevent cracking and dispersed throughout the surface pressure, especially in the external wall insulation system (EIFS 30).
4 × 5mm
white, blue, orange, yellow, green, etc.
1 × 50m
160g / m mesh fabric used in the plaster layer of the insulative body reinforcement, to provide a space to maintain the movement between the layers through the shrinkage and the temperature change due to shrinkage or temperature prevent cracking and breakage.
if you are intersted in product,pls contact me.